ORIGINAL RESOPAL®-RESOFLOOR®
RESOFLOOR® TITANIUM DREAM
- High gloss ORIGINAL RESOPALR surface Titanium High Wear (TH) on HDF
- Suitable for intensive use in a commercial environment (usage demand category 33)
- Extremely resistant to wear (AC 5)
- Highly resistant to mar
- Highly impact resistant due to 1.0 mm RESOPALR surface (IC 3)
- Skid resistant in accordance with the requirements of Class DS
pursuant to EN 14041 (sliding friction coefficient μ ≥ 0.3) - High resilient click system
High gloss in vogue
High gloss surfaces are fully in vogue. They play with light reflexions and thus become an ideal mirror of the atmosphere in a room and convey significance and value as an architecture and design element. Already frequently used on kitchen fronts, worktops, shop and trade fair unit design and construction, they convey force, perfection and elegance. However, so far it was not possible to continue with these values in extremely high demand when it came to floorings. For manufacturing reasons the surfaces lacked the required wear resistance.
RESOFLOOR® closes this gap in the market
RESOFLOOR® combines the beauty of high gloss with the extremely high level of resistance required for floors subject to maximum wear stresses and in this way perfects the high gloss design concept in high quality interior finishings.
• Demand category 33
• Wear category AC 5
• Shock resistance IC 3
Maximum resistance capability and fine high gloss – these two excellent properties are uniquely combined in our flooring RESOFLOOR®. Although RESOPAL® has always stood for one of the hardest, most hard-wearing and easy-care surfaces, the surface of the floor Titanium High Wear is now the result of a further technological quantum leap.
Worldwide unique, patented technology
As early as the 1990s corundum - second in hardness only to diamonds - has been worked into overlays, thus creating wear resistant surfaces. However, in order to manufacture extremely wear resistant high gloss surfaces, it was necessary to increase the corundum content and to locate the particles directly at the surface. But this failed so far due to the limited hardness of standard press plates. The worldwide unique technology for titanium coated press plates, developed and patented by Wilsonart, now allows us to manufacture the maximum wear resistant high gloss surface to a wear category AC 5 – Titanium High Wear.
Maximum brilliance and excellent use characteristics
Laid on a 1 mm thick high density fibre board (HDF) for RESOFLOOR®, the ORIGINAL RESOPAL® Titanium High Wear surface gives your floor maximum brilliance with an extreme load capability - even in a commercial environment (Demand category 33). RESOFLOOR® is extreme abrasion and wear resistant (AC5), stable in its form, shock and impact resistant (IC 3), proved against stains, proved against burning cigarettes and chair castor frictions as well as highly light-fast. In excess of 6,000 revolutions with coarse emery paper (Taber test) did not leave any traces on Titanium High Wear. RESOFLOOR® is equipped with a highly resilient click system, which ensures a fast and easy laying and makes the floor re-useable several times over.
The RESOFLOOR® floor elements are available in the professional large format 1488 x 293 x 11.4 mm.
RESOFLOOR® can be combined with high gloss skirting boards – with the same pattern, matching colours or setting accents, e.g. with a fine metallic appearance – with an elegant 3mm edge radius. The skirting boards can be used to finish the floor surface area in the same decorative pattern or to set a design accent for the wall covering. You decide: Is the skirting board a part of the floor or a part of the wall.